We reserve the right to substitute goods within your order with goods of an equivalent nature (i.e. a yellow stretch film dispenser for a red one). If you do not wish to accept the substituted goods then you must return them to us within 7 days of their receipt.
Although we aim to show images that are accurate and applicable to the goods they are only representational of the product and may vary in colour or packaging.
Due to supply and demand we may offer the the same product but with different branding.
The polythene film extrusion process involves blowing up a molten bubble of film and then cooling and cutting it to shape. This is a technically difficult process and is affected by external conditions (such as heat and humidity) and by the flexibility and stretchiness of the film. Whilst our suppliers strive to obtain exact dimensions, a degree of manufacturing tolerance is therefore always required on every product.
Please do not hesitate to to discuss any specific tolerance required on your job.
Plus or minus 3mm (0.125") or 2%, whichever is greater. If you need a minimum width, please contact us.
Plus or minus 6mm (0.25") or 2%, whichever is greater. Please note that all measurements are cut to cut and will therefore include a bottom skirt of about 8mm on end weld bags (apart from grip seal bags where length is measured from the grip seal to the bottom of the bag).
Plus or minus 10%.
For manufactured goods only, Plus or minus 10%.